Furling Windchargers protect themselves by turning out of extremely high winds

All prices include VAT

• Peaks up to 200W pre-furling.                       Proven technology for

• Turbine diameter: 910mm                             off-grid homes and

• Weight: 15Kg                                                 professional applications

• HRSi or HRDX Regulator recommended.     such as remote tele-comms.

Part Nos: 12V  CA-02/01                £645.95                   

                  24V CA-02/02                £645.95

All prices include VAT

Furling Windchargers protect themselves by turning out of extremely high winds.

• Peaks up to 750W pre-furling.                         Newly designed Windcharger

• Manual stall facility.                                         and controller for remote

• Turbine diameter: 1869mm                             homes, tele-comms,

• Tower top weight: 35.2Kg                               & telemetry, etc.

• MPC 1 Controller included protects

 batteries against overcharge.

(Controller shown below)

• Digital display.

Part Nos: Windcharger: CA-03/02

Control Gear: CA-04/10 12V or CA-04/11 24V

                                                            £1499-95                               All prices include VAT

MARLEC - Windcharger Accessories

Voltage Regulators and Controllers

Connect between the windcharger, plus solar panels where fitted, and the battery to

prevent overcharge. Voltage regulation is pulse width modulation (PWM) type which

slows the turbine down as the batteries become fully charged. All models are diode

protected to allow charging from other sources to the same battery. Choose between

the single bank HRS range or the HRDX Controller for twin battery banks.

HRSi Regulator     NEW FOR 2008

•  For use with Rutland 913, FM910-3 and 503 with

       up to 160 W of solar panels.

•  Led indicators show battery and charge status.
•  Turbine / solar panel shutdown switch.
•  Intelligent battery charging.
•  Temperature compensation for all charging conditions.
•  Automatic voltage recognition for use with 12 and

       24 V systems.

      Part No: CA-11/46 12/24V                                   £69.95

      Dims: 130x 80x 42mm   Weight: 0.185Kg.

                                                                        All prices include VAT

HRS503 Regulator

• For use with Rutland 503 with up to a 100W of solar panels.
•  Led indicators show battery and charge status.
•  Flying lead connection

      Part No: CA-11/45 12V                                  £42.95

     Dims: 150x75x34mm Weight: 0.12Kg

All prices include VAT

HRDX Controller

• Simple combination of one Rutland 503,

      913 or FM910 plus up to 100W of solar

      panels.

• 5 Position switchable LCD displays battery

      volts and charge currents.

• Charge splitter for 2 battery banks.
• Turbine / solar panel shutdown switch.

     Part No:

    12V CA-11/42                                      £149.95

    24V CA-11/43                                      £149-95

   Dims: 157x137x59mm    Weight:0.85Kg

All prices include VAT

Comprise:-

2 x 1m pole sections for Rutland 503: 2 x 1.2m pole sections for Rutland

913: Tube joiner: Deck fixing brackets: Guy to pole attachments: (guys

not included) Stainless steel fasteners.

Rutland 503 Marine Mtg Kit-Part No: CA-12/01                      £94-95

Rutland 913 Marine Mtg Kit-Part No: CA-12/02                    £121-95

Top sections of pre-drilled stainless steel tube are available for customers

own tower design.

Stainless Steel Tube (Rutland 913) 1200mm - Part No: CA-12/03 £32.95

Stainless Steel Tube (Rutland 913)   600mm - Part No: CA-12/04 £22.95

Stainless Steel Tube (Rutland 503) 1000mm - Part No: CA-12/15 £26.95

Stainless Steel Tube (Rutland 503)   500mm - Part No: CA-12/16 £19.95

     All prices include VAT

Marine Mounting Kits in polished stainless steel

Deck Mounting Brackets

Purpose designed stainless steel brackets for

mounting the Rutland 503 or 913 tube to a flat surface. The pole must be

supported by guy ropes.

Part Nos: (913) CA-12/09 (503) CA-12/23               £17.95

All prices include VAT

Land Mounting Kits: Tower and rigging kits are available separately.

The pole must be supported by guys or use rigging kit: CA-12/07.

Tower Kit-503 - For temporary installation. This is a 4.0m(2 x 2m

sections) of polished stainless steel tube ready drilled for assembly

complete with joiner and ground spike.

Part No: CA-12/12 (not shown)            £104-95

Tower Rigging Kit-503 - Complete with guys ready fitted to tower

attachments, shackles and ground anchors (anchors suitable for

temporary installation on firm ground). For permanent installation

or other ground types alternative anchors may be required.

Part No: CA-12/13 (not shown)             £69-95

Tower Kit-910 Series - 6.4m (3 x 2.13m sections) of 48mm dia

Galvanized steel tube ready drilled for assembly complete with

joiners. Suitable for use with Rutland 913 or FM910-3 Windchargers.

Part No: CA-12/08                                 £99-95

All prices include VAT

Land Mounting Kits

12V Digital Timer Unit

A useful 12V programmable digital timer for the convenience of on/off switching in DC systems. Minimises energy consumption to conserve battery power. Simple to install and use. Up to 8 on/8 off settings per day. Can be used in daily, 7 day week, 5 day week and weekend modes. 500 hour built in back-up. Incorporates 10A change over relay for load switching. Can be surface or DIN rail mounted.

Dims: 36x85x50mm                         Part No: 933-013                            £69-95

Passive Infra-Red

Switch Unit

CA-20/01

Adjustable outdoor 12V PIR with control switch unit. IP55 rated and with a range of 8 to 35 metres, the PIR detects motion and activates a switch within the separately supplied control unit which can be connected to 12V 5A maximum load eg. Lighting.

                                                  Part No:  CA-20/01                               £119-95

12V Dusk to Dawn Sensor

12V Dusk to Dawn Sensor - Cont........

Ideal for use with outdoor security lighting, this adjustable photosensitive cell will switch any 12V DC load up to 5A for night time use.

A built in sensor disconnects the load in the event of low battery volts. The housing

is IP66 rated for all weather installation.

Dims: 92x120x55mm                Part No: CA-20/02                                    £89-95

Technical Advice: Full colour technical brochures are available for most of the  products or visit our website for more information. Our technical sales team will be pleased to discuss the details of your system requirements and confirm availability of your order. Contact us by email: info@solarplanetearth.co.uk or call 0845 116 1935.

Placing an Order: Please call us on 0845 116 1935 or email: info@solarplanetearth.co.uk.

Payment: We accept most bank debit and credit cards, VISA and MASTERCARD via PayPal, or bank transfer to our account. Cheques must be cleared in advance of goods being dispatched.

Prices: Pounds Sterling. Prices include VAT @ 17½%. Prices may be subject to change without notice.

Carriage: Charged at cost according to weight, location and service. Please call for a quotation.

Specifications: Owing to continuous product improvement these may be subject to change without notice